Friday, November 27, 2009

DigiTV Plasma and LCD TV Articulating Swivel & Tilting Wall Mount. Universal Design for 30" to 60" Displays

Buy Cheap DigiTV Plasma and LCD TV Articulating Swivel & Tilting Wall Mount. Universal Design for 30" to 60" Displays


Buy Low Price From Here Now

The Digicom PMA-773 Articulating Mount for 30-60" flat panel screens provides a versatile and secure solution for professional environments. This mount offers smooth, continuous 45 degree side-to-side and 15 degree up-down tilting.
Readmore

Technical Details

- 45 Degree Side to Side Tilting / 15 Degree Up-Down Tilting
- Maximum Weight: 165 Pounds
- Works with most 30" to 60" Displays
- Five Year limited Warranty
See more technical details
Customer Buzz
 "Good and solid for the price " 2008-04-01
By Joee (Ca. USA)
GOOD: Solid two stud wall mount, Tilt, Arms do not sag at all.

Universal VESA size support.



OK: Installation can be time consuming, use two people!



BAD: Bulky, the TV hangs 4" from the wall, it limits access to my TV

connections in the back (TV Specific). It has less mobility than a

single arm wall mount. I had to cut to size for a 32" TV.



INSTALLATION:

Well I installed a 32" LCD with this wall mount and it seems to be solid.

It was very easy to attach the wall plate to the wall studs.

Connecting the rest of the hardware to the TV was a little time consuming.

There are six adjustment screws that clamp to the horizontal bars, they

can be a little awkward to tighten. I had to cut the horizontal bars to

fit the width of the TV. A larger TV may not require this step.

Hanging the TV on the wall mount was easy, but setting the screws that

lock the TV to the wall plate was a BIT**. Then again, I did this by

myself and the instructions clearly say to "Use two people".



OPINION:

This mount can support a much larger TV than the one I mounted. I was

going for overkill. This TV is going in my son's room. We have three boys

in one room an clearly have no space for even a standard 19" TV. I have

done two other LCD installations and both of them sagged using a single

arm wall mount. This mount DOES NOT SAG! It also does not move as easy

or as far compared to the single arm wall mounts. This works out best

in my case. Less is more. Also I had to deal with the fact that the TV

required a VESA 400x200 screw pattern. Overkill in my opinion. The TV

is mounted high in the room so it needed a good tilt angle and it does.

Bottom line it was the right combination for my needs. I give it "4 STARS"


Images Product

Buy DigiTV Plasma and LCD TV Articulating Swivel & Tilting Wall Mount. Universal Design for 30" to 60" Displays Now

0 comments:


Free Blogger Templates by Isnaini Dot Com and Powered by Blogger |edit by 155cafe